Aluminum Hanging Cleat

Spring 2025 -

We're hoping to bring this excellent Cleat back into production....look for word of that over at Benchmark at Ely.

A strong, thin, two-part cleat designed for hanging text or photo panels or wall cases. Supplied as a single 6' length which, when cut in half, supplies 3' of mated cleat. One length is mounted to the wall, with the slot facing up (that's the bottom half of our drawing...we are the wall's-eye view); the other is mounted to the panel or case with the slot facing down. Hanging your panel is a now simple matter of lowering it onto the wall-mounted cleat so that the two cleats interlock. The joined profile is only 1/4" thick. The extrusion has holes at 1" intervals, ready for drywall screws. No countersinking is required.

Oversized shipping applies for this item. From one to sixteen cleats will fit in one large tube. We'll add 1 o/s charge to your cart. If you need more cleats (say 17), we are into another tube. We'll add 2 o/s charges to your cart.

We believe we have fixed the O/S shipping charge problems so those charges should now be added to your cart automatically. If you still have problems placing your order, call 609-397-1131 or email us at ask@benchmarkcatalog.com.

Spring 2025 -

We're hoping to bring this excellent Cleat back into production....look for word of that over at Benchmark at Ely.

A strong, thin, two-part cleat designed for hanging text or photo panels or wall cases. Supplied as a single 6' length which, when cut in half, supplies 3' of mated cleat. One length is mounted to the wall, with the slot facing up (that's the bottom half of our drawing...we are the wall's-eye view); the other is mounted to the panel or case with the slot facing down. Hanging your panel is a now simple matter of lowering it onto the wall-mounted cleat so that the two cleats interlock. The joined profile is only 1/4" thick. The extrusion has holes at 1" intervals, ready for drywall screws. No countersinking is required.